|
Two Column Medium Force Test System
Bi-00-100 free standing 2-column tension
compression Universal Testing Machines, available in the range of
25–500 kN perform variety of tests on materials and components.These test systems are very economical and easy to install.
Standard features
- 0-100 Hz cycling frequency
- Hydraulic lifts and clamps
- 25/50/100/150/200/250/500 kN force rating actuators
- +/-100 mm stroke actuators
- Adaptable to wide range of fixtures & grips
- Actuator on fixed bottom crosshead
- Electronically servo-controlled variable flow, variable pressure, low noise, energy efficient pump
- 5+ kHz 32-bit digital closed loop control
- 24-bit data acquisition
- User friendly MTL-Windows software with dedicated application software
- Provision for user programmability
Applications
- Fatigue crack propagation
- Fracture mechanics
- Room temperature tests
- High temperature tests
- Testing in corrosive environment
- Tension/compression
- Low/High cycle fatigue (LCF/HCF)
| Load frame | Model no | Bi-01-100-2CT | Bi-01-101/2CT | Bi-01-102/2CT | Bi-01-103/2CT | Bi-01-104/2CT | | Capacity | Up to 25kN | 30-50kN | 75 -150kN | 200-300kN | 400-600kN | Column space | 400 mm | 600 mm | 600 mm | 600 mm | 800 mm | Total height | 2100 mm | 2750 mm | 2750 mm | 2750 mm | 3400 mm | Max daylight | 1000 mm | 1500 mm | 1500 mm | 1500 mm | 2000 mm | Min daylight | 200 mm | 300 mm | 300 mm | 300 mm | 300 mm | No of columns | 2 | 2 | 2 | 2 | 2 | Weight | 200 kg | 750 kg | 950 kg | 1100 kg | 1700 kg | Actuator | Model no | Bi-02-106 | Bi-02-107 | Bi-02-108 | Bi-02-109 | Bi-02-110 | Bi-02-111 | Bi-02-112 | Capacity | 25kN | 30kN | 50kN | 100kN | 150kN | 250kN | 500kN | Stroke | 25/50/100/150/250mm
| Manifold | NG6 ports – 3, Accumulator ports & customer ports
| Servo valves | 4/12/24/40/LPM
| Weight | 45kg | 48kg | 68kg
| 85kg | 100kg
| 145kg
| 225kg | 2350 Basic controller
| Model no
| Specifications | Bi-04-R19 | 19"
Rack enclosure with 110/220 V a.c. power supply and back plane
expansion slots, with USB communication interface designed for
operation with computer interface only | Bi-04-MB-8S | Motherboard with eight channel servo output | Bi-04-BP-109 | Back plane interface card to hydraulics, pneumatics, furnace, LCF and DCPD | Bi-04-DSP | DSP card with USB cable | Bi-04-SC-151 | Digital (AC) single channel (LVDT) signal conditioner compatible with 4 & 5 wire LVDT | Bi-04-SC-152 | Digital (DC) single channel (strain bridge) signal conditioner compatible with 120, 350, 700 & 1000 ohms strain bridge | Bi-04-DA-251 | 4 channel digital data acquisition card, PCI form factor | Bi-04-BW-903 | Basic software for single actuator | Bi-04-FW-901 | MTL 7 firmware for single actuator | Bi-04-EC-801 | External
cable set, includes stroke cable, load cell cable, strain cable, servo
cable, hydraulic cable, earth cable, digital signal cables for
signal conditioners. | Hydraulic power pack
| Model No | Flow rate,
LPM | Power required,
kW | Weight without oil,
kg | Cooling | | Bi-03-101 | 2 to 4 | 1.5 | 60 | No cooling required | Bi-03-121 | 6 to 8 | 3 | 70 | No cooling required | Bi-03-102 | 11 to 15 | 5.5
| 224 | Water cooled | Bi-03-103 | 21 to 30 | 11 | 425 | Water cooled | Bi-03-122 | 32 to 42 | 18.5 | 544 | Water cooled | Bi-03-104 | 45 to 60 | 22 | 608 | Water cooled | Bi-03-105 | 65 to 90 | 30 | 650 | Water cooled | Load Cell
| Model No | Bi-06-106 | Bi-06-107 | Bi-06-108 | Bi-06-109 | Bi-06-110 | Bi-06-111 | Bi-06-112 | Capacity | 25kN | 50kN | 100kN | 150kN | 200kN | 250kN | 500kN | Bridge resistance | 350 Ohms
| Shunt calibration | Internal shunt with logic control for auto calibration | Linearity | Better than 0.3% of FR |
|
