Nano Plug n Play
The Bi-00-201 Series of “Plug ‘n’ Play” test systems are possibly the
most cost effective solution to mechanical testing requirements for
strength, fatigue and fracture in the 5 to 25 kN force range of static
and dynamic loading.
These stand-alone test systems require no site preparation and no
special utilities such as water cooling or even 3-phase supply. Just
plug into the closest 15 A mains socket like any other office equipment
and the system is ready for use.
Bi-00-201 systems are ideal for engineering colleges, R&D as well
as industry users, searching for a low-cost solution in materials
testing. Standard features
- 5/10/15 kN force rating actuator
- +/-25 mm stroke servo-actuator
- 0-100 Hz operation
- Virtually noiseless
- No external cooling required
- Rated for indefinite operation
- USB interface for host computer
- Includes application software
Applications
- Tension/Compression
- Ductile and Brittle Fracture
- Fatigue crack propagation
- Threshold stress intensity
- Low/High-Cycle Fatigue (LCF/HCF)
- Elastomer properties
Optional features
- +4/-1 mm COD gauge for fracture mechanics
- +/-1.5 mm,12.5 mm gauge LCF extensometer
- Tension/compression extensometer
- Clevis set to suit B5/W12.5 C(T) specimens
- 3-pt bend fixture
- LCF/tensile grips for round specimens
Other Specifications
- 220V 2.0 kVA power requirement
- W600xL600x1750 mm outer dimensions
- Approx 175 kg weight
- Full digital servo-control with 24-bit data acquisition and digital signal conditioning for load cell, stroke and extensometry
- 6 kHz loop update and data acquisition
Specifications
Capacity
|
5/10 kN
|
15 kN
|
25 kN
|
|
Column clearance
|
400 mm
|
400 mm
|
400 mm
|
|
Maximum daylight
|
500 mm
|
500 mm
|
700 mm
|
|
Total frame height
|
1300 mm
|
1300 mm
|
1500 mm
|
|
Table dimensions
|
600x600 mm
|
600x600 mm
|
600x600 mm
|
|
No of columns
|
2
|
2
|
2
|
|
Weight
|
100 kg
|
120 kg
|
160 kg
|
Note: Dimensions subject to minor variations based on specific
ratings.
|
