|
CV Joint Test System
Bi-00-603 BiSS CV Joint Test System for constant velocity testing as per SAE J 2028. The test setup evaluates the quality of CV joints by simulating the actual movements as in automobiles with BiSS 2370MS controller. The two mounting blocks bolted on the frame support a hydraulic motor and a torque load cell coupled with transducers for precision measurement and customized grips to hold the test specimen. The mounting blocks have provision to rotate (+/-45 degrees) and also to move to and fro adjusting to the varying lengths of specimen.
Applications (as per SAE J 2028)
- Articulation torque test to measure the torque required to rotate the shaft, when articulated at any point between 0 to 50 degrees
- Measures backlash of the joint, maximum articulation angle, maximum articulation angle and force at any articulation angle from 50 degrees
- Optional testing under cold temperatures upto -400 C
- Optional testing under hot temperatures upto 2000 C
- Radialexpansionmeasurement
Standard features (customized options available)
- Hydraulic Torque Motor
- Torque load cell
- Suitable for static and dynamic testing
- "Green" highly efficient hydraulic powerpack
- BiSS2370MScontroller for synchronous control and data acquisition
Optional features
Environmental chambers Specifications
| Hydraulic motor |
Torque: 1.5 kNm
Speed: 1500 rpm
Includes torque cell, 1.5 kNm and suitable digital position encoder |
| 2370MS Controller |
Control channels: 1 channel of servo control
Input channels: 2
Performance: Typical servo-loop update and DAQ frequency up to 5 kHz |
| Hydraulic powerpack |
Digital servo-control with flow of up to 200 LPM
Operating pressure: Up to 210 bar
Power consumption: 10 to 80 kVA through “flow on demand� servo control |
| Environment chamber (Optional) |
Size: 1000 x 500 x 500 mm
Temperature range: -40 deg.C to 200 deg.C
Accuracy: +/- 1 deg.C
Average rate of rise /fall with load: 1 deg.C/min over entire range |
| Total weight of rig |
1.5 Ton |
| Foot print |
L x W x H = 2.5 X 1 X 1.2 m |
Note: Dimensions subject to minor variations based on specific ratings.
|
